ayuda con servidor vsftpd

[luix182]

hola, hace mucho que no vengo por aca pero en fin; eh estado tratando de configurar el servidor vsftpd pero siplemente no puedo¡, no eh podido iniciar una sesion que no sea anonima, alguien me puede pasar una informacion que me pueda ayudar? eh configurado el archivo de configuracion pero aun no puedo logearme, agregue usuarios y me dio otros errores; mi configuracion es esta:

Código: [Seleccionar]

# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Disabled by default)USUARIOS ANONIMOS
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.USUARIOS LOCALES
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in  your  local  time  zone.  The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Server hacking FTP¡.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
chroot_local_user=YES
chroot_list_enable=YES
# (default follows)
chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Debian customization
#
# Some of vsftpd's settings don't fit the Debian filesystem layout by
# default.  These settings are more Debian-friendly.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/private/vsftpd.pem

creeo que tengo problema al crear usuarios pero no se como verificar los estatus y esas cosas, algun colega que pueda ayudar?
basicamente necesito como transferir archivos desde maquinas con linux y todo en entorno shell¡¡
gracias¡¡

[Duende]

Mirate este manual www.canal-ayuda.org/linux/ftp.pdf

[luix182]

gracias man; bueno ya lo eh leido pero no es tan diferente a lo que habia leido antes, son las mismas configuraciones pero lo que me interesa crear son las cuentas de usuario, solo que no me es posible crear un login correcto, sabes como dar usuarios de alta?

[Duende]

Chequea este enlace http://www.linuxhispano.net/2010/09/14/configurar-servidor-ftp-en-linux-con-vsftpd/, en el apartado crear usuarios te explica como darlos de alta.

[Joan]

Te pongo una guía rápida (todos los pasos son con root)

Antes que nada, paramos vsftpd:

Código: [Seleccionar]

/etc/init.d/vsftpd stop

1. Después de instalar vsftpd agrega el usuario del FTP de la siguiente manera:

Código: [Seleccionar]

useradd -d /ruta/del/httpdocs/ nombre_de_usuario

2. Le establecemos un password:

Código: [Seleccionar]

passwd nombre_de_usuario

3. Con tu editor favorito edita el fichero

Código: [Seleccionar]

/etc/vsftpd/chroot_list

añadiendo el usuario. Si hubiera más, se pone un usuario por línea. Ejemplo:

Código: [Seleccionar]

Usuario1
Usuario2

4. Luego damos permisos a la carpeta httpdocs del primer paso:

Código: [Seleccionar]

chown -R nombre_de_usuario:nombre_de_usuario /ruta/del/httpdocs/

5. Levantamos el servicio de vsftpd:

Código: [Seleccionar]

/etc/init.d/vsftpd start

6. LISTO!